Error when starting the development environment
This article contains a possible solution, if particular messages are displayed when starting logi.CAD 3.
Symptom 1: The following message appears in the Error Log view: Unable to load class "name" from bundle "number"
Causes |
Solution |
You have installed different versions of logi.CAD 3. |
|
You use a workspace from a previous version of logi.CAD 3. |
Afterwards you are able to start logi.CAD 3 by double-clicking logiCAD3.exe again. |
Symptom 2: The following message appears: The default workspace "path/name" is in use or cannot be created. Please choose a different one.
Cause |
Solution |
You have imported a larger project in logi.CAD 3. This might have took some time because the workspace was being refreshed/built as well. For this action,logi.CAD 3 has locked the workspace. |
If the message is still displayed, close logi.CAD 3 again and reboot the computer before restarting logi.CAD 3. |
Symptom 3: The following internal message appears in the Error Log view: An internal error occurred during: "action"
Cause |
Solution |
You have imported a larger project in logi.CAD 3. This might have took some time because the workspace was being refreshed/built as well. |
|
Symptom 4: The following internal message appears in the Error Log view: The -clean (osgi.clean) option was not successful. Unable to clean the storage area: path\configuration\org.eclipse.osgi
Cause |
Solution |
You have exited and restarted logi.CAD 3 at once using the same workspace. However, t
he saving of the workspace was not finished yet before the restart of
logi.CAD 3
. |
Usually, you are able to ignore this message Best practice f or the future starts of logi.CAD 3 is to wait a few seconds before you restart logi.CAD 3. |
logi.cals recommends to install and use the most current versions of logi.CAD 3 and the runtime system so that the latest features and problem fixes according to the release notes are provided in the used version.
Did this article help you? Did you find the requested information in this user documentation?
If not, contact the support team of logi.cals. State your questions or suggestions to improve/enhance the user documentation as detailed as possible.