CTU_ULINT block
Short summary
Name |
|
→POU type |
|
Category |
|
Conform to →IEC-standard |
no restrictions |
Graphical interface |
|
Available since |
version 1.19.0 (for Neuron Power Engineer) |
Functionality
The block is an up-counter (for ULINT
values).
If there is a positive →edge at input CU
, the counter is activated and increments the counter value by 1
. If input R
is →turned on, the counter value is reset to value 0
. Enter a limiting value at input PV
. If this limiting value is reached or exceeded, output Q
is set to value TRUE
(or an equivalent). The incrementing is stopped, if the upper limit of ULINT
(= value 18,446,744,073,709,551,615
) is reached. Output CV
returns the current counter value of the block.
In-/outputs
|
Identifier |
Description |
|
---|---|---|---|
Inputs: |
|
|
increment in case of positive edge |
|
|
flag for reset |
|
|
|
limiting value |
|
Outputs: |
|
|
flag showing whether limiting value is reached or not |
|
|
current counter value |
Input EN
and output ENO
are available when →calling the block. See "Execution control: EN, ENO" for information on input EN
and output ENO
.
See:
-
"Blocks for safe logic" whether this block is supported for developing safety-relevant applications.
-
"Highlighting safe logic in the FBD-editor" for the effects when using the block as a block for safe logic.
Example for usage within ST-editor
|
When creating your application within the ST-editor, enter a call of a block by typing the text as requested by the syntax or use Content Assist.