Supported target systems
logi.CAD 3 supports the following →target systems (observe the properties and/or restrictions specific to the target system):
target system |
Further Information |
→Arduino Nano 3 |
Best practice is to use the PLC-object arduinoNanoV3. The appropriate platform ArduinoNanoV3 is already entered in this PLC-object. See the tutorial Putting Controllino or Arduino Nano into operation, if you need more information. |
→Controllino of these sizes: |
Best practice is to use the corresponding PLC-object for a Controllino. The appropriate platform (e.g. ControllinoMINI) is already entered in this PLC-object. See the tutorial Putting Controllino or Arduino Nano into operation, if you need more information about addressing this target system. |
Linux computer, in particular
|
You have to enter the platform LinuxX86 within a PLC-object. |
Best practice is to use the PLC-object RevolutionPi. The appropriate platform RevolutionPi is already entered in this PLC-object. See the tutorial Putting Revolution Pi into operation, if you need more information. |
|
Best practice is to use the PLC-object phyBoardRegor. The appropriate platform phyboardRegor is already entered in this PLC-object. See the tutorial phyBOARD-Regor oder phyBOARD-Wega in Betrieb nehmen, if you need more information. |
|
Best practice is to use the PLC-object phyBoardWega. The appropriate platform phyboardWega is already entered in this PLC-object. See the tutorial phyBOARD-Regor oder phyBOARD-Wega in Betrieb nehmen, if you need more information. |
|
Best practice is to use the PLC-object raspberry. The appropriate platform Raspbian is already entered in this PLC-object. See the tutorial Putting Raspberry Pi into operation, if you need more information. |
|
Windows computer |
If you want to test/operate the application on the local Windows computer, best practice is to use the PLC-object local. The appropriate platform BuiltInPlc is already entered in this PLC-object. See the tutorial The first loadable application: testing with integrated PLC, if you need more information about addressing this target system. |
If you want to address a PLC from within logi.CAD 3, the appropriate platform has to be entered within the PLC-object of the logi.CAD 3 project. The available platforms are listed under Configuring PLC within PLC-object.